Zertifizierung - Parker 650 Serie Manual De Producto

10-4
Zertifzierung des Umrichters

Zertifizierung

Zertifizierung
bei Ent-
In accordance with the EEC Directive
sprechung mit
der EMV We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
Richtlinie,
responsibility that the above Electronic
wenn der
Products when installed and operated with
Antrieb als
reference to the instructions in the Product
relevante
Manual (provided with each piece of
Apparatur
equipment) is in accordance with the relevant
eingesetzt
clauses from the following standards:-
wird.
Dies dient als
We Parker Hannifin Manufacturing Limited,
Hilfe zur
address as below, declare under our sole
eigenen
responsibility that the above Electronic
Beurteilung
Products when installed and operated with
der EMV
reference to the instructions in the Product
Entsprechung,
Manual (provided with each piece of
wenn der
equipment) is in accordance with the relevant
Antrieb als
clauses from the following standards:-
Komponente
eingesetzt
wird.
Parker Hannifin Manufacturing Ltd., Automation Group, SSD Drives Europe,
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000
Registered Number: 4806503 England.
650 0.25 - 4.0
EC D
ECLARATIONS OF
Date CE marked first applied: 26/07/2001
EMC Directive
2004/108/EC
BSEN61800-3(2004)
M
ANUFACTURERS
EMC Declaration
BSEN61800-3(2004)
Dr Martin Payn (
Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
W 230V
K
C
ONFORMITY
Low Voltage Directive
In accordance with the EEC Directive
2006/95/EC
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual
(provided with each piece of equipment), is in
accordance with the following standard :-
EN61800(2007)
D
ECLARATIONS
Machinery Directive
The above Electronic Products
are components to be incorporated into
machinery and may not be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
2006/42/EC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
Conformance Officer)
FAX: +44(0)1903 737100
Der Antrieb
erhält das CE
Zeichen,wenn er
bei korrekter
Installation den
Vorschriften
gemäß Nieder-
spannungsricht-
linie für
elektrische An-
lagen und Geräte
im Spannungs-
bereich
entspricht.
Weil potentielle
Gefahr meist
elektrischen und
nicht mecha-
nischen Ur-
sprungs ist, fällt
der Antrieb nicht
unter die
Maschinenricht-
linie. Es kann
jedoch eine
Erklärung des
Herstellers
geliefert werden,
wenn der Antrieb
(als Kompo-
nente) in einer
Maschine
eingesetzt wird.
Frequenzumrichter 650 Baugröße 1, 2 & 3