Routine Maintenance; Repair; Saving Your Application Data; Disposal - Parker 650 Serie Manual De Producto

R
OUTINE

Routine Maintenance

Repair

IMPORTANT: MAKE NO ATTEMPT TO REPAIR THE UNIT - RETURN IT TO PARKER.

Saving Your Application Data

Returning the Unit to Parker

Disposal

650 Series AC Drive
M
AINTENANCE AND
Periodically inspect the drive for build-up of dust or obstructions that may affect ventilation of
the unit. Remove this using dry air.
There are no user-serviceable components.
In the event of a repair, application data will be saved whenever possible. However, we advise
you to make a note of your application settings before returning the unit.
Please have the following information available:

The model and serial number - see the unit's rating label

Details of the fault
Contact your nearest Parker Service Centre to arrange return of the item.
You will be given a Returned Material Authorisation. Use this as a reference on all paperwork
you return with the faulty item. Pack and despatch the item in the original packing materials; or
at least an anti-static enclosure. Do not allow packaging chips to enter the unit.
This product contains materials which are consignable waste under the Special Waste
Regulations 1996 which complies with the EC Hazardous Waste Directive - Directive
91/689/EEC.
We recommend you dispose of the appropriate materials in accordance with the valid
environmental control laws. The following table shows which materials can be recycled and
which have to be disposed of in a special way.
Material
metal
plastics material
printed circuit board
The printed circuit board should be disposed of in one of two ways:
1. High temperature incineration (minimum temperature 1200C) by an incinerator authorised
under parts A or B of the Environmental Protection Act
2. Disposal in an engineered land fill site that is licensed to take aluminium electrolytic
capacitors. Do not dispose of in a land fill site set aside for domestic waste.
Packaging
During transport our products are protected by suitable packaging. This is entirely
environmentally compatible and should be taken for central disposal as secondary raw material.
Routine Maintenance and Repair
R
EPAIR
Recycle
yes
yes
no
8-1
Disposal
no
no
yes