Siemens POINTEK CLS200 Manual De Arranque Rápido página 3

Level Measurement
Point level measurement
RF Capacitance switches
Pointek CLS300 - Standard
Selection and Ordering data
Pointek CLS300 - Standard - Rod Version
with Threaded or Flanged process connection
Inverse frequency shift capacitance level and
material detection switch with optional rod/cable
choices and configurable output. CLS300 is ideal
for detecting liquids, solids, slurries, foam, and
interfaces in demanding conditions where high
pressure and temperatures are present, and has
the ability to tune out buildup on the probe.
Click on the Article No. for the online configura-
tion in the PIA Life Cycle Portal.
Process connection
Threaded, 316L stainless steel
¾" NPT [(Taper), ANSI/ASME B1.20.1]
1" NPT [(Taper), ANSI/ASME B1.20.1]
1¼" NPT [(Taper), ANSI/ASME B1.20.1]
1½" NPT [(Taper), ANSI/ASME B1.20.1]
4
R ¾" [(BSPT), EN 10226/PT (JIS-T), JIS B 0203]
R 1" [(BSPT), EN 10226/PT (JIS-T), JIS B 0203]
R 1½" [(BSPT), EN 10226/PT (JIS-T),
JIS B 0203]
G ¾" [(BSPP), EN ISO 228-1/PF (JIS-P),
JIS B 0202]
G 1" [(BSPP), EN ISO 228-1/PF (JIS-P),
JIS B 0202]
G 1½" [(BSPP), EN ISO 228-1/PF (JIS-P),
JIS B 0202]
Welded flange, 316L stainless steel, raised face
1" ASME, 150 lb
1" ASME, 300 lb
1" ASME, 600 lb
1½" ASME, 150 lb
1½" ASME, 300 lb
1½" ASME, 600 lb
2" ASME, 150 lb
2" ASME, 300 lb
2" ASME, 600 lb
3" ASME, 150 lb
3" ASME, 300 lb
3" ASME, 600 lb
4" ASME, 150 lb
4" ASME, 300 lb
4" ASME, 600 lb
Welded flange, 316L stainless steel,
Type A flat faced
DN 25, PN 16
DN 25, PN 40
DN 40, PN 16
DN 40, PN 40
DN 50, PN 16
DN 50, PN 40
DN 80, PN 16
DN 80, PN 40
DN 100, PN 16
DN 100, PN 40
(Note: flange bolting patterns and facings
dimensionally correspond to the applicable
ASME B16.5 or EN 1092-1 standard.)
Probe length
(length from flange face)
(threaded lengths include process thread)
Note: No Y01 needed in Order code for
standard lengths
Standard version, rod 350 mm (13.78 inch)
Extended rod, length 500 mm (19.69 inch)
Extended rod, length 750 mm (29.53 inch)
Extended rod, length 1 000 mm (39.37 inch)
4/42 Siemens FI 01 · 2018
© Siemens AG 2018
Article No. Selection and Ordering data
7ML5650- Pointek CLS300 - Standard - Rod Version
with Threaded or Flanged process connection
-
7 7 7 7 7 7 7 7 7
Inverse frequency shift capacitance level and
material detection switch with optional rod/cable
choices and configurable output. CLS300 is ideal
for detecting liquids, solids, slurries, foam, and
interfaces in demanding conditions where high
pressure and temperatures are present, and has
the ability to tune out buildup on the probe.
Add Order code Y01 and plain text:
"Insertion length ... mm"
Extended rod, factory adjusted length
250 ... 499 mm (9.8 ... 19.65 inch)
Extended rod, factory adjusted length
0 A
500 ... 749 mm (19.69 ... 29.49 inch)
0 B
Extended rod, factory adjusted length
0 C
750 ... 999 mm (29.53 ... 39.3 inch)
0 D
Thermal isolator
1 A
Without thermal isolator
1 B
With thermal isolator [for process connection
temperatures over 85 °C (185 °F)]
1 D
Wetted seals
FKM
3 A
FFKM [for process temperatures above
-20 °C (-4 °F)]
3 B
Probe material
3 D
316L stainless steel with PFA lining and PEEK
isolators
Approvals
5 A
Dust Ignition Proof with IS Probe:
5 B
CE, RCM, ATEX II 1/2 D T100 °C
5 C
Flameproof Enclosure with IS Probe:
5 D CE, RCM, ATEX II 1/2 G EEx d[ia] IIC T6 ... T1,
ATEX II 1/2 D T100 °C
5 E
Flameproof Enclosure with IS Probe,
5 F
with WHG approval:
5 G
CE, RCM, ATEX II 1/2 G EEx d[ia] IIC T6 ... T1,
5 H
ATEX II 1/2 D T100 °C
5 J
Dust Ignition Proof with IS Probe:
5 K
CSA/FM Class II, Div. 1, Groups E, F, G
5 L CSA/FM Class III T4
5 M
Explosion Proof Enclosure with IS Probe:
CSA/FM Class I, Div. 1, Groups A, B, C, D
5 N
CSA/FM Class II, Div. 1, Groups E, F, G
5 P
CSA/FM Class III T4
5 Q
General Purpose (CSA, FM)
General Purpose (CE, RCM)
6 A
General Purpose with WHG approval
6 B
(CSA, FM, CE, RCM)
6 C
Enclosure and lid
6 D
Aluminum epoxy coated
6 E
2 x ½" NPT via adapter - cable inlet, IP65
6 F
2 x M20 x 1.5 cable inlet, IP65
6 G 2 x ½" NPT via adapter - cable inlet, IP68
6 H 2 x M20 x 1.5 cable inlet, IP68
6 J
Active shield length
6 K Standard length -
(125 mm threaded, 105 mm flanged)
Extended shield -
(250 mm threaded, 230 mm flanged)
Extended shield -
(400 mm threaded, 380 mm flanged)
1)
Available with Probe version options B ... D, F, G only
[t 500 mm (19.69 inch)]
2)
Available with Probe version options C, D, and G only
A
[t 750 mm
B
C
D
1)
2)
(29.53 inch)]
Article No.
7ML5650-
-
7 7 7 7 7 7 7 7 7
E
F
G
0
1
0
1
0
C
D
E
F
G
H
J
K
A
B
C
D
0
1
2