Application Examples; Technical Support - Siemens POINTEK CLS200 Manual De Arranque Rápido

Pointek CLS200/300 Standard
•
model and to the manual
Specifications: Standard model
•
Installation: Pointek CLS200 Standard
•
Installation: Pointek CLS300 Standard
•
Wiring: Pointek CLS200/300 Standard
•
Operation: Pointek CLS200 Standard model
•
Operation: Pointek CLS300 Standard model
•
Appendix A: Technical References
•
Appendix B: Maintenance and Repairs
•
Appendix C: Product Nameplates
•
Appendix D: Hazardous Area Installation
•
Appendix E: Dimensions - CLS200
•
Appendix F: Dimensions - CLS300
•
Appendix G: Shortening the cable
•
We always welcome suggestions and comments about manual content, design, and
accessibility. Please direct your comments to techpubs.smpi@siemens.com.
For other Siemens Milltronics level measurement manuals, go to:
www.siemens.com/level and look under Level Measurement.

Application Examples

The application examples used in this manual illustrate typical installations using
Pointek CLS200/300; other configurations may also apply.
In all examples, substitute your own application details. If the examples do not apply to
your application, check the applicable parameter reference for the available options.

Technical Support

Support is available 24 hours a day.
To find your local Siemens Automation Office address, phone number and fax number go
to:
www.siemens.com/automation/partner
• Click on the tab Contacts by Product then drill down to find your product group
(+Process Automation > +Process Instrumentation > +Level Measuring
Instruments).
• Select the team Technical Support. Click on Next.
• Click on the appropriate continent, then select the country followed by the city.
Click on Next.
For on-line technical support go to:
www.siemens.com/automation/support-request
• Enter the device name or order number, then click on Search, and select the
appropriate product type. Click on Next.
• You will be prompted to enter a keyword describing your issue. Then either
browse the relevant documentation, or click on Next to email a detailed
description of your issue to Siemens Technical Support staff.
Siemens IA/DT Technical Support Center: phone
Page 2 Pointek CLS200/300 Standard – OPERATING INSTRUCTIONS
- an introduction to Pointek CLS200/300 Standard
+49 (0)911 895 7222
7ML19985JH04