Siemens SENTRON PAC5100 Instrucciones De Servicio página 11

s
Operation of devices with a display
Main menu (device-dependent)
Setting the language
Setting the measurands (device-dependent)
Operation via WebBrowser
The graphical user interface is stored in the device. To display the user interface, start
Microsoft Internet Explorer 6.0 (or higher) and enter the IP address (default IP address:
192.168.0.55; also see label on the side of the device) of the device.
You can navigate through Microsoft Internet Explorer using the icons on the toolbar, for
example back, forward, print etc. The user interface itself does not contain any navigation
icons.
The following table lists the control elements:
Operating Instruction
E50417-B1050-C600-A1, Edition 03.2015
Control Element
Structure of the HTML pages
Repair
CAUTION
Danger of damage due to static electrical charges
The user is not authorized to repair the device when it is defective. This
is because the device contains special electronic components that may
only be handled by the manufacturer in compliance with the regulations
for electrostatic sensitive devices (ESD).
Furthermore, hazardous voltages can lead to lethal injuries when the
work is performed improperly.
If you suspect that the device has a defect, Siemens recommends to
send the entire device back to the manufacturer.
Cleaning
Switch off the device. Wiped the device with a clean, dry and soft cloth. Do not use
solvents.
Measuring devices
PAC5100/5200
Control Function
Option button: selects one option
List box: selects an item from a list
Button: Executing an action by clicking
the button, that is the current settings on
the user interface are transmitted to the
device.
Active tab (light blue)
Inactive tab (dark blue)
Selects and opens the item to be acti-
vated, for example a tab
11