10.0 Tracking Mode
Tracking Mode
11.0 Barometer Mode
C u r r e n t
pressure
Unit
Barometer Mode
Unit in inHg
How to Measure the Relative Altitude
● The Station can measure relative altitude. For example, it can
measure the ascending or descending altitude between the
starting point and the finish point of a trail.
● When the Track mode is selected, the icon "TRK" will appear on
the screen.
● To measure the ascending or descending altitude of a trail, just
hold [R] to reset the reading to zero and press [S/S] to start
tracking at the starting point of a trail. The flashing "TRK" indicator
will be shown on the display.
● You can check the reading at any point you like and it shows the
altitude relative to the starting point.
● When you finish the Tracking, press [S/S] to stop the function.
● Press [R] to show the Maximum height, minimum height and
current height relative to the starting point in sequence.
Auto Update
● The Station will update the reading automatically.
● For the first 5 minutes, when the Altimeter mode is selected, it will
update every second.
● Will update every 10 seconds in the next 24 hours
● Afterwards, it will update every minute.
Pressu re Grap h
Scan
Hold
[S/S]
Unit in mb/hPa
29
Functional Display
● When the Barometer mode is current pressure and
"BARO" be shown on the screen.
● Hold [S/S] to switch the display unit.
Pressure memory.
● Press [S/S] in sequence
1. To change the display to the Pressure graph which
shows the Pressure history for the past 35 hours;
2. To move to the SCAN mode which shows the current
pressure
and
Pressure
history
alternatively every 5 seconds;
3. To go back to the current Barometer display.
graph
display