Abicor Binzel iCAT Instructivo De Servicio página 28

2 Product description
Wire types
Type of use
Voltage rating
Protection type of the machine-side connections
Shielding gas (DIN EN 439)
General torch data according to EN 60 974-7
Tab. 8
Type
ROBO WH 242D
ROBO WH W500
ROBO WH 652 D TS liquid
Product-specific torch data (EN 60 974-7) in connection with iCAT
Tab. 9
1For pulse arcs, the load data are reduced by up to 35%.
2.4 Abbreviations
ROBOWH
Abbreviations
Tab. 10
2.5 Nameplate
EN - 6
The following data only apply in connection with the iCAT WH:
1
Type of Load
cooling
CO M21
2
A A
liquid 320 280 100
liquid 360 340 100
360 340 100
The load data were determined under standard conditions, at low to medium
heat of reflection, free air circulation and an ambient temperature of approx.
28°C When used under more strenuous conditions, the load data must be
reduced by 10-20%.
Applications above 360A are possible in connection with the liquid-cooled
torches ROBO WH W500 and ROBO WH 652 D TS using a special power-
water-cable. It is available upon request.
Automatic welding torch, liquid-cooled
Commercially available round wires
Duty Wire  Gas
cycle flow
% mm l/min
0.8-1.2 appr. 20 800
0.8-1.6 10-20
1.0-1.6 10-20
iCAT WH
ROBO WH
automatic
Peak value of 141 V
IP3X (EN 60 529)
CO or M21
2
Cooling data
Cooling Flow Flow
capacity pressure
min. min. min. max.
W l/min bar
1 1.5
800 1 1.5
800 1 1.5
bar
3.5
3.5
3.5