Responsibilities Of The User; Product Description; Designated Use - Abicor Binzel iCAT Instructivo De Servicio

2 Product description

1.2 Responsibilities of the User

2 Product description

2.1 Designated use

2.2 Use contrary to the designated use
2.3 Technical Data
Transport and storage
Relative humidity
Ambient conditions
Tab. 2
Dimensions
Weight of the iCAT WH (excluding torch)
Max. deflection X, Y axis
Max. deflection Z axis
Reset precision
General data
Tab. 3
iCAT WH ROBOWH
Weight of the iCAT ABIROB
Tab. 4
EN - 4
Within the EEA (European Economic Area), the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labor
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (04/108/EEC) and that the signal
utilization of the integrated welding current monitoring against stray currents is
installed properly.
The iCAT WH must be used in the robot welding area. Designated use also
includes the observance of the prescribed operating, maintenance and
servicing instructions.
Any use other than that described under "Designated Use" is considered
contrary to the designated use. Unauthorized conversions are not allowed.
iCAT WH excluding torch
2.3 kg
®
iCAT WH ROBO WH
- 10 °C to + 55 °C
up to 70 % at 20 °C
ø = 100 mm
2.3 kg
10°
8 mm
± 0.1 mm
iCAT WH including torch
WH W500= 2.9 kg, WH 242D= 2.8 kg,
WH 652 D TS= 3.2 kg
iCAT WH
L = 197 mm