Important - Zapf Creation BABY born 824368 Manual De Instrucciones

naked BABY born Soft Touch on the potty. Grip the doll's belly with both hands, press down
hard on her belly button and hold the pressure.
The water can now flow into the potty.
6.2. BABY born Soft Touch can go to the potty and do a number 2. (Fig. 6)
BABY born Soft Touch was fed with BABY born Food, so the corresponding tank is filled.
Place the naked BABY born Soft Touch onto the potty. Grip the doll's belly with both hands,
press down hard on her belly button and hold the pressure.
The content of the food tank goes into the potty. If both tanks inside BABY born Soft Touch
are filled, pressing the belly button will empty them both at the same time.
6.3. BABY born Soft Touch can also do a "number 2" in her nappy.
Put on a new nappy and press her belly button after feeding while the doll is in a standing or
sitting position. Press until all of the food has made its way into the nappy.
Warning! Please make sure all the food is removed! Please note the cleaning instructions
and the instructions for changing nappies.
Important! After feeding and using the potty, the tube system inside BABY born Soft Touch
should be cleaned immediately.
7. I can take a bath. (Fig. 7)
BABY born Soft Touch can have a bath in the bathtub or be taken to the swimming pool. But
she should not be fully immersed in water. Please do not leave the doll in direct sun light for
an extended period of time (max. 1 hour).
For bathing BABY born Soft Touch, you should only use cold or tepid water, and only utilize
common bath additives which are suitable for children. BABY born Soft Touch should not be
fully immersed in bathwater, chlorine water or salt water for more than an hour, otherwise
chemical reactions or bleaching could occur.
Please rinse and clean BABY born Soft Touch with clear water immediately after bathing.
Please follow the cleaning and drying instructions!

Important!

1. Water can enter the tubes and tanks when playing in the bathtub. That is why the tube
system inside BABY born needs to be cleaned immediately after a bath. To do so, read the
cleaning instructions. (c.f. "Cleaning instructions")
2. If water should get inside the doll, please empty it out before continuing to play with BABY
born and use the doll's functions.
3. BABY born Soft Touch is not suitable for use as a floatation device.
4. Do not use cosmetic products or skin care products on BABY born Soft Touch.
8. I am even more flexible. (Fig. 8)
BABY born Soft Touch has a mobile head and mobile arms and legs. The shoulder joints can
be turned 360° to make dressing and undressing the doll with BABY born Clothing easier.
9. I can sleep. (Fig. 9)
BABY born Soft Touch has sleeping eyes. Once BABY born Soft Touch is laid down, she
closes her eyes. BABY born Soft Touch is asleep.
10. I don't need batteries. (Fig. 10)
All described functions work mechanically.
11. Cleaning instructions: (Fig. 11)
The cleaning process should be carried out by an adult only!
If BABY born Soft Touch gets dirty, she can be cleaned externally using a damp cloth.
Using tepid, soapy water makes it easier to clean the doll.
After bathing or feeding, the tube system inside BABY born Soft Touch should be cleaned
immediately. If the doll is not cleaned, the remnants from the bathwater, chlorine water, salt
water or food may block the tubing and tanks inside of the doll.
If the doll is used for an extended period of time without being cleaned, there is a risk of
mould forming.
To clean BABY born Soft Touch in the correct way, fill the bottle with warm water and mild
washing-up liquid and place the tip of the bottle halfway into the mouth of the doll pointing
12