Publicidad
Idiomas disponibles
Idiomas disponibles
down (if the bottle were pushed all the way in, the water would enter the wrong tank). Once
the bottle is empty, you should shake BABY born Soft Touch hard enough to loosen the
remnants inside. Then place BABY born Soft Touch on her potty and press her belly button
for an extended period of time, so the entire contents can come out.
Repeat this process several times and rinse with clear water at least twice. Upon final rinse,
there should not be anything visible in the rinse water. Leave BABY born Soft Touch on the
potty for about 15 minutes after cleaning to make sure all the water has flowed out.
Important:
After cleaning with soapy water, the process should be repeated with a solution of vinegar
and water to prevent mould stains and mould from forming. Mix a splash of regular vinegar
with warm water. Then repeat the cleaning process described above using the vinegar solu-
tion. Finally, repeat the cleaning process with clear water at least twice.
12. Drying instructions: (Fig. 12)
To dry BABY born Soft Touch, please place the doll on her back and put her arms in a verti-
cal position. (Fig. 12) Then press her arms several times to remove any water still located in
her arms. Repeat this step several times if needed.
Then position the doll upright. If there is water in the body, it will leak out of the two holes at
the bottom of the upper body. If there is water in the legs, it will leak out of the two holes in
the doll's feet.
Shake the doll to find out if there is any remaining water in her arms, legs or body. Please
repeat the above steps several times to make sure the doll is completely empty.
To dry BABY born Soft Touch, please carefully dry the doll and all her joints with a towel.
Finally, let BABY born Soft Touch air out at a warm and well aired location for a while.
Please note that drops of water may still leak out of the joints or feet or the holes in the doll.
Remove the leaking water with a dry towel and put a nappy on the doll.
Fonctions
1.
Corps souple.
BABY born Soft Touch a un corps souple. Sa surface est particulièrement maniable et est
facile à presser. (Fig. 1)
Cela simplifie l'utilisation de certaines fonctions. (Cf. n° 2, « Je sais boire » & n° 4 « Je sais
pleurer »)
2.
Je sais boire. (Fig. 2)
Remplir le biberon BABY born Soft Touch avec de l'eau courante et bien visser la tétine sur
le biberon.
Portez votre poupon BABY born Soft Touch allongé dans vos bras pour que la tétine du
biberon soit tournée vers le bas et puisse entrer dans la bouche de la poupée.
Enfoncer la tétine dans la bouche du poupon jusqu'à sentir une résistance.
Vous pouvez alors appuyer doucement et régulièrement sur le biberon pour faire boire le
bébé - environ un tiers du contenu.
Si de l'eau s'écoule de la bouche du poupon BABY born Soft Touch pendant qu'il tète,
veuillez rectifier la position du biberon dans la bouche et appuyer légèrement sur le côté du
biberon.
Attention : n'utilisez que de l'eau ! Les autres liquides peuvent obstruer les tuyaux et le
réservoir à l'intérieur de la poupée.
3.
Je sais faire dans ma couche. (Fig. 3)
Donnez un biberon d'eau à votre BABY born Soft Touch ; cf. n° 2, « Je sais boire ».
Mettez une couche BABY born propre à votre poupon BABY born Soft Touch. Appuyez main-
tenant sur le nombril du poupon BABY born Soft Touch et il fera pipi dans la couche.
La couche est mouillée.
Vous pouvez alors changer la couche de votre BABY born Soft Touch.
FR
13
Publicidad
