BH FITNESS H370 Manual De Instrucciones página 12

b.- Check the voltage output from the
transformer.
Problem: Display segments of a
function read-out are not visible or
error messages
function appear.
Solution:
a.- Check that cables (52) and (B) are
connected properly. Please refer to
the assembly manual, Fig.3.
b.- Check that cable (51) is plugged
into the monitor socket (A) correctly.
c.- If the above steps do not help then
replace the electronic monitor.
for a particular
Avoid leaving the electronic monitor in
direct sunlight as this might damage
the liquid crystal display. Similarly, do
not expose it to water or knocks.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
12