Checking And Cleaning The Terminals; Removing The Battery - APRILIA MX 125 Manual De Instrucciones

CHECKING AND CLEANING
THE TERMINALS
Carefully read p. 73 (BATTERY).
Remove the left side cover, see pag. 58
◆
(REMOVING THE SIDE COVERS).
Make sure that the cable terminals (1)
◆
and the battery terminals (2) are:
√ in good conditions (and not corroded
or covered with deposits);
√ c o v e r e d wi t h s p e c i a l g r e a s e o r
Vaseline.
If necessary:
Remove the battery,
◆

(REMOVING THE BATTERY).

Eliminate any sign of corrosion with a
◆
wire brush.
Reconnect first the positive (+) and then
◆
the negative cable (√).
use and maintenance MX 125
74
Cover the terminals with special grease
◆
or Vaseline.
Reinstall
◆
(INSTALLING THE BATTERY).
REMOVING THE BATTERY
Carefully read p. 73 (BATTERY).
Make sure that the ignition switch is in
◆
position ≈
Remove the left side cover, see pag. 58
◆
(REMOVING THE SIDE COVERS).
Unscrew and remove the screw (3) from
◆
see beside
the negative terminal (√).
Move the negative cable (√) (4) sidewards.
◆
Unscrew and remove the screw (5).
◆
Remove the cover (6).
◆
the battery, see p. 57
∆.
Partially remove the battery from its
◆
compartment.
Unscrew and remove the screw (7) from
◆
the positive terminal (+).
Move the positive cable (+) (8) sidewards.
◆
Withdraw the breather pipe(9).
◆
WARNING
Once it has been removed, the battery
must be stored in a safe place and kept
away from children.
Remove the battery from its compartment
◆
and put it on a flat surface, in a cool and
dry place.