Changing The Front And Rear Direction Indicators; Changing The Rear Light Bulb - APRILIA MX 125 Manual De Instrucciones

CHANGING THE FRONT AND REAR
DIRECTION INDICATORS
Carefully read pag. 78 (BULBS).
CAUTION
Before changing a bulb, check the
fuses, see pag. 76 (CHANGING THE
FUSES).
Unscrew and remove the screw (1).
◆
WARNING
Upon reassembly, tighten the screw (1)
carefully and moderately, in order not to
damage the protection screen.
Remove the protection screen (2).
◆
Press the bulb (3) slightly and rotate it
◆
anticlockwise.
Extract the bulb from its seat.
◆
CAUTION
Insert the bulb in the bulb socket,
making the two pins coincide with the
relevant guides on the bulb socket.
Correctly install a new bulb of the same
◆
type.
CHANGING THE REAR LIGHT
BULB
WARNING
Before changing a bulb, check the
fuses, see pag. 76 (CHANGING THE
FUSES) and the efficiency of the
s t o p l i g h t s w i t c h e s , s e e p a g . 7 7
(CHECKING THE SWITCHES).
Carefully read pag. 78 (BULBS).
Unscrew and remove the two screws (4).
◆
WARNING
Upon reassembly, tighten the two
screws (4) carefully and moderately, in
order not to damage the protection
screen.
Remove the protection screen (5).
◆
Press the bulb (6) slightly and rotate it
◆
anticlockwise.
Extract the bulb from its seat.
◆
CAUTION
Insert the bulb in the bulb socket,
making the two pins coincide with
t h e r e l e v a n t g u i d e s o n t h e b u l b
socket.
Correctly install a new bulb of the same
◆
type.
use and maintenance MX 125
81