Main Independent Controls; Controls On The Left Side Of The Handlebar - APRILIA MX 125 Manual De Instrucciones

MAIN INDEPENDENT CONTROLS

1
use and maintenance MX 125
32
2

CONTROLS ON THE LEFT SIDE OF THE HANDLEBAR

5
The electrical parts work only when the ignition switch is in
position " ".
1) HIGH BEAM SIGNALLING PUSH BUTTON (
4
It makes it possible to use the high beam for signalling to
forthcoming vehicles while overtaking and in case of peril
and/or emergency.
2) COLD START LEVER ( )
The starter for the cold start of the engine is operated by
3
rotating the lever ≈
To disconnect the starter, return the lever ≈
position.
3) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
4) HORN PUSH BUTTON (
The horn is activated when the push button is pressed.
5) DIP SWITCH (
When the dip switch is in the ≈
come on; while when the dip switch is in the ≈
low beams will come on.
CAUTION
∆ anticlockwise (Pos. A).
)
)
- )
∆, position, the high beams will
)
∆ to its initial
∆, position, the