Incorrect Operation - Columbus McKinnon YLITP ATEX 500 Instrucciones De Servicio

Maintenance work and the annual inspection of the units must not be carried out in rooms with
an explosion hazard.
I O
NCORRECT PERATION
(List not complete)
Do not exceed the rated load capacity (WLL) of the unit and/or the suspension and the
supporting structure.
The unit must not be used for pulling free fixed loads. It is also prohibited to allow loads to
drop when the chain is in a slack condition (danger of chain breakage).
Removing or covering labels (e.g. by adhesive labels), warning information signs or the
identity plate is prohibited.
When transporting loads ensure that the load does not swing or come into contact with other
objects.
The load must not be moved into areas which are not visible to the operator. If necessary, he
must ensure he is given help.
Driving the unit with a motor is not allowed.
The unit must never be operated with more than the power of a person.
Welding on hook and load chain is strictly forbidden. The load chain must never be used as a
ground connection during welding.
Side pull, i. e. side loading of the top hook (or the trolley for models with trolley), the housing or
the bottom block is forbidden. The optional trolley must be perpendicular above the load at any
time.
The load chain must not be used as a chain sling.