Columbus McKinnon YLITP ATEX 500 Instrucciones De Servicio página 35

A unit changed without consulting the manufacturer must not be used.
Do not use the hoist for the transportation of people.
Do not knot the load chain or connect it by using pins, bolts, screw drivers or similar. Do not
repair load chains installed in the hoist.
Removing the safety latches from top and/or load hooks is forbidden.
Never attach the load to the tip of the hook. The lifting tackle must always be seated in the
saddle of the hook.
Do not use the chain stop as an operational limit device.
©
2014 Columbus McKinnon Industrial Products GmbH