SRO 2550 ROT 350
5 INSTALLATION
5.1 Mechanical installation
The attachment of the X-ray tube housing assembly is described in the installation instruc-
tions of the system.
5.1.1
Alignment ring
See
The example in the figure beside
figure 3
shows the SRO-family.
The four screws of the alignment ring
are sealed to guarantee the correct fit.
The collimator is automatically aligned
in the correct position.
If a compatible collimator is used
Caution!
The alignment ring must not be removed.
•
Mount the coupling flange on the alignment ring respective the correct position of the
fit, slot and key.
•
The collimator can be mounted without further alignment.
SRO 2550 ROT 350
SRO_2550_ROT_350_Manual_English.fm
Figure 3: Sealing of the alignment ring
(05.0)
2004 Philips Medical Systems
ALL RIGHTS RESERVED
CMT_013/014
13