CST/BERGER RL25H Manual Original página 40

Operating Modes
Function of buttons that are both on the rotational laser level as
well as on the remote control do not differ. With exception of the
stand-by function, no additional functions of the rotational laser
level can be controlled with the remote control.
Example: Pressing the rotation operation button switches the
rotational laser level from line operation to rotation operation.
This happens no matter if you press the rotation operation but-
ton on the rotational laser level or on the remote control. When
the rotational laser level does not have different rotational
speeds, then the rotational speed can also not be changed with
the remote control.
The shock-warning function cannot be controlled with the re-
mote control.
For detailed information of the rotational laser functions, see
the operating instructions of the rotational laser.
Stand-by-operation with Storage of the Operating Mode
The rotational laser level can be switched to stand-by-operation
for 2 hours (max.). For this, press the stand-by button 53 on the
remote control. Rotation, laser and all indicators on the rota-
tional laser level, with exception of the levelling indicator, are
switched off, and the set operating mode is saved. Stand-by op-
eration can only be started with the remote control.
Press any button on the remote control to restart the rotational
laser level in the saved operating mode.
Rotation, Line and Point Operation
By pressing the rotation operation button 61, you can switch
from line to rotation operation or decrease the rotational speed
in steps down to zero (point operation).
By pressing the line operation button 55, you can switch from
rotation to line operation or increase the aperture angle in
steps.
Rotating the Laser Point/Laser Line in the Rotational Plane
The laser point or the laser line can be rotated in steps by 360°
within the rotational plane. Press button 57 to rotate in clock-
wise direction, and button 59 to rotate in anticlockwise direc-
tion. Pressing and holding the buttons increases the speed of
the rotation head in the desired direction.
Single-axis Slope Operation/Aligning the Rotational Plane
in the Vertical Position
Depending on the position of the rotational laser level, you can
rotate the rotational plane around the X or Y-axis by pressing up-
per direction button 63, lower direction button 58, right direc-
tion button 56 and left direction button 60.
For this, press the button for single-axis slope operation 62
first.
When the rotational laser level is in the horizontal position, you
can rotate the rotational plane around the X-axis with the upper
direction button 63 and lower direction button 58.
When the rotational laser level is in the vertical position, you
can rotate the rotational plane around the Y-axis with right di-
rection button 56 and left direction button 60.
40 | English
Maintenance and Service
Maintenance and Cleaning
Keep the remote control clean at all times.
Do not immerse the remote control into water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
If the remote control should fail despite the care taken in manu-
facture and testing, repair should be carried out by an author-
ised customer services agent for Bosch power tools. Do not
open the remote control yourself.
In all correspondence and spare parts orders, please always in-
clude the 10-digit article number given on the type plate of the
remote control.
After-sales Service and Customer Assistance
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
2 610 A15 294 • 7.5.12