Technical Data; Power Supply; English | 27 - CST/BERGER RL25H Manual Original

6 Charge-control indicator
7 Shock-warning indicator
8 Shock-warning button
9 Lower direction button
10 Upper direction button
11 Indicator for single-axis slope operation
12 Button for single-axis slope operation
13 Exit opening for laser beam
14 Variable laser beam
15 Plumb beam (RL25HV)
16 Battery compartment
17 Socket for charge connector*
18 Battery pack*
19 Nut for battery compartment/battery pack

Technical Data

Rotational Laser Level
Article number
Working range (radius)
– without laser receiver, approx.
– with laser receiver, approx.
1) 2)
Levelling Accuracy
Self-levelling range, typically
Levelling duration, typically
Rotational speed
Aperture angle for line operation
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam Ø at the exit opening, approx.
Tripod mount (horizontal)
Batteries (NiMH)
Batteries (alkali-manganese)
Operating life time, approx.
– Batteries (NiMH)
– Batteries (alkali-manganese)
Weight according to EPTA-Procedure 01/2003
Dimensions (length x width x height)
Degree of protection
1) at 20 °C
2) alongside the axes
3) The operating duration depends on the characteristics of the batteries/rechargeable batteries being used and can vary with different manufacturers.
The measuring tool can be clearly identified with the serial number 21 on the type plate.
Assembly

Power Supply

The measuring tool can be used either with commercially availa-
ble batteries/rechargeable batteries, which are inserted in bat-
tery compartment 16, or with the CST/berger battery pack 18.
2 610 A15 294 • 7.5.12
1)
3)
20 Tripod mount 5/8"
21 Serial number
22 Laser warning label
23 Laser receiver
24 Construction laser measuring rod*
25 Tripod*
26 Remote control*
27 Laser viewing glasses*
28 Wall mount/alignment unit*
29 Laser target plate*
30 Case
31 Battery charger
32 Charge connector
* The accessories illustrated or described are not included as stand-
ard delivery.
RL25H
F 034 K61 0NE
225 m
±0.08 mm/m
±8 % (±5°)
600 min
–10...+50 °C
–20...+70 °C
635 nm, <1 mW
5/8"-11
2 x 1.2 V HR20 (D) (9 Ah)
3 x 1.5 V LR20 (D)
2.3 kg
200 x 220 x 190 mm
IP 56 (protected against dust
and powerful water jets)
Operation with Batteries/Rechargeable Batteries
Using alkali-manganese or rechargeable batteries is recom-
mended for operation of the measuring tool.
To insert the batteries/rechargeable batteries, loosen nut 19
and remove the battery compartment 16.
F 034 K61 0N5
30 m
±0.08 mm/m
±8 % (±5°)
15 s
-1
150/300/600 min
– 10/25/50°
–10...+50 °C
–20...+70 °C
90 %
2
635 nm, <1 mW
5 mm
2 x 1.2 V HR20 (D) (9 Ah)
3 x 1.5 V LR20 (D)
30 h
85 h
200 x 220 x 190 mm
IP 56 (protected against dust
and powerful water jets)

English | 27

RL25HV
30 m
225 m
15 s
-1
90 %
2
5 mm
5/8"-11
30 h
55 h
2.3 kg