Snapper XD ESXDUC82 Manual De Utilización página 12

EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
82 volts. Nominal voltage is 72.
DESCRIPTION
The machine is made up of the following
main components (See figure 1) :
1. Forward/Reverse button
2. Lock-out button
3. High/Low speed button
4. Power switch
5. Thumb paddle
6. Battery cover
7. Upper handle
8. Bucket
9. Bucket release lever
10. Caster wheel
11. Front wheel
12. Drawbar
13. Knob assembly
ASSEMBLY
UNPACKING
This product requires assembly.
„ Carefully remove the product and any
accessories from the box. Make sure
that all items listed in the packing list are
included.
„ Inspect the product carefully to make
sure no breakage or damage occurred
during shipping.
„ Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the product.
WARNING
Use of a product that may have been
improperly assembled could result in
serious personal injury.
PACKING LIST
„ Self propelled utility cart
English (original instructions)
„ Handle assembly
„ Knobs and U-bolts
„ Manual
If any parts are damaged or missing,
do not operate this product until the
parts are replaced. Using a product with
damaged or missing parts could result in
serious personal injury.
Do not attempt to modify this product or
create accessories not recommended
for use with this product. Any such
alteration or modification is misuse and
could result in a hazardous condition
leading to possible serious personal
injury.
ATTACH THE UPPER HANDLE
See figure 2.
„ Slide the upper handle over the lower
handle tubes on the bucket assembly.
Make sure the bolt holes align.
„ Insert a U-bolt (13-1) from the outside
of the handle, passing through the bolt
hole where the upper and lower handles
attach.
„ Once the U-bolt (13-1) is completely
through the handle assembly, tighten
the knob (13-2) securely.
„ Attach the other side of the handle the
same way.
8
WARNING
WARNING