Help With Errors; Vehicle Malfunctions; Error Messages For Symbol Displays - Kärcher MC 130 Manual Del Usuario

You can rectify minor faults yourself using the following overview.
If in doubt, please consult the authorised customer service.
DANGER
Risk of electric shock
Turn off the appliance and remove the key prior to any care and
maintenance work.
Malfunction
The vehicle cannot be started
Motor is running erratically
Motor is running but machine is
not moving or moving slowly
Motor does not switch off (main
switch to 0)
Dust during sweeping/insuffi-
cient suction performance
Unsatisfactory sweeping perfor-
mance
Side brushes cannot be activat-
ed
Side brushes do not turn
Emptying of waste container not
working
Note
Malfunction

Help with errors

Vehicle malfunctions

Remedy
 Check battery/charge.
 Turn on the main switch.
 Sit on the driver seat (the seat contact switch is activated).
 Set the travel direction lever to the NEUTRAL position - central position.
 Top up fuel, bleed the fuel system.
 Check, clean and/or replace fuel filter.
 Check the fuel connections and lines.
 Contact the authorised Customer Service.
 Clean or replace air filter.
 Check, clean and/or replace fuel filter.
 Top up fuel, bleed the fuel system.
 Check the fuel connections and lines.
 Contact the authorised Customer Service.
 Release parking brake.
 Check setting of freewheel lever.
 Have the oil level for the traction hydraulics checked by Customer Service.
 During minus temperatures and with cold hydraulic oil: Allow machine to warm up for at least for 3
minutes.
 Clean fuel cock on fuel filter.
 Attach the fuel pump.
 If this keeps occurring, contact Customer Service.
 Empty waste container.
 Switch on the suction blower.
 Check hose on suction fan.
 Check/replace seals:
a Sealing cover on suction fan.
b Filter box seal.
c Waste container seals.
 Checking/cleaning/replacing dust filter.
a Check that the dust filter is secured correctly.
b Clean the dust filter in case of slight soiling.
c Clean the dust filter in case of damage or replace it in case of heavy soiling.
 Check/adjust the sealing strips for wear, replace as necessary.
 Check roller brush and side brushes for wear, replace if necessary.
 Check sealing strips for wear, adjust or replace as required.
 Check function of coarse dirt flap.
 Check the sweeping roller half sections for proper seating.
 Check filling level of hydraulic oil tank.
 Check the hydraulic system for tightness.
 Contact Customer Service.
 Check filling level of hydraulic oil tank.
 Check the hydraulic system for tightness.
 Check the side brushes for wrapped belts.
 Contact Customer Service.

Error messages for symbol displays

Cause
Engine overheated.
Repair work and work on the electrical components may only be
performed by an authorised Customer Service.
In case of all malfunctions not listed, contact Customer Service!
Remedy
 Set the engine speed to idle mode.
 Clean the radiator (see chapter Cleaning the radiator)
 Check the level of coolant in the engine.
 If the warning light does not go out within 5 minutes:
a Switch off the engine
b Contact Customer Service
English 107