2. Safe use
CAUTION!
The term "device" or "product" in the warnings and instructions refers to the vacuum
packing machine.
2.1.
a)
The device plug must fit into the socket. Do not modify the plug in any way.
Original plugs and matching sockets reduce the risk of electric shock.
b)
Avoid touching earthed items such as tubes, radiators, heaters and
refrigerators. There is an increased risk of electric shock if your body is earthed
and touches the device exposed to direct rain, wet floor and humid
environment. If water penetrates into the device, there is an increased risk of
damage to the device and electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Do not use the cable in a wrong way. Never use it to carry the device or to pull
the plug out of the socket. Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables increase the risk of electric
shock.
e)
If you cannot avoid using the device in a wet environment, use a residual
current device (RCD). Using an RCD reduces the risk of electric shock.
f)
Do not use the device if the power cable is damaged or shows clear signs of
wear. A damaged power cable should be replaced by a qualified electrician or
the manufacturer's service.
g)
CAUTION - DANGER TO LIFE! When cleaning or using the device, never
immerse it in water or other liquids.
2.2.
a)
Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be careful, watch what you are doing and use common sense when
working with the device.
b)
If in doubt as to whether the device is working properly, contact the
manufacturer's service.
c)
Repairs to the device may only be carried out by the manufacturer's service.
Do not carry out repairs yourself!
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire
and/or serious injury or death.
Electrical safety
Safety in the work area