Time Interval Preselection; Change Pin Code - Mowox RM 750 BTU-SN Manual De Instrucciones

6.4 T
IME INTERVAL PRESELECTION
The robot repeats the mowing cycle displayed in hours by LED daily at the time you
press the buttons
This time is understood incl. interruptions of mowing operation in the base station for
charging the battery.
After unlocking the keyboard (
The factory setting is generally sufficient for areas up to 1000 m². Initially, give the
robot two weeks before you judge its result; it must first work its way through your
garden.
Increase the time setting if you have manually interrupted the operation for a longer
period of time or if you desire a higher performance.
Unlock the keyboard as shown in chapter
Choose the desired time interval with
the LED indicator has reached the desired interval. As you push the buttons
, the new time program is run.
Each intermediate "OK" input resets the start time for the se-
If the power supply is interrupted while the robot is in the base,
the default operating time is counted from the time the power
6.5 C
HANGE
Change the PIN code when the main power switch is set "ON"
Every time you turn on the device, you need to input the PIN code to unlock the ro-
botic mower.
The factory-set PIN code is "1234"; you can change this PIN code as below:
1. Enter the valid keyword "1234".
2. Simultaneously push the lock button and the OK button. The lock indicator and
& .
lected operating time.
supply is restored.
PIN
CODE
) you can change the time interval.
6.1
KEY OPTIONS
by pushing this button several times until
28 (EN)
.
und