Cleaning The Underside; Blades; About The Blades; Blade Replacement - Mowox RM 750 BTU-SN Manual De Instrucciones

Cleaning the mower body
The robot mower is battery powered - so take care when cleaning. Use a soft brush
and/ or a damp cloth with usual household detergent. Wipe off any residues after
cleaning.

Cleaning the underside

Ensure t h e m a i n power switch is in
Turn the robotic mower onto its side to expose its underside, clean the blade disc
and frame, using a soft brush or damp cloth. Rotate the blade disc to make sure
that it moves freely, and check that the blades can turn on their bearings.
Clean the contact pins and the charging strips
Use metal cleaner or very fine-grade emery paper to clean the contact pins and the
charging strips on your mower/ charging station. Remove any debris, leaves or
grass clippings around the contact pins and charging strips to ensure efficient charg-
ing.
9.4 B
LADES

About the blades

WARNING
!
Ensure the robotic mower is completely shut off and wear protective
gloves before cleaning, adjusting or replacing the blades.
WARNING!
To ensure maximum cutting efficiency and safety, always use the original
manufacturer replacement blades and blade mounting parts when replac-
ing.
There are three blades on your mower which are mounted onto the blade disc.
These blades can last up for 3 months (if no obstacles have been hit). Please re-
member to replace all three blades at the same time for best balance and cutting
performance.

Blade replacement

Use a screwdriver to remove each of the mounting screws and blades. Then re-
place each blade and firmly re-screw. Please make sure your newly assembled blades
OFF
position and wear protective gloves.
39 (EN)