Mowox RM 750 BTU-SN Manual De Instrucciones página 455

problem message on
the LED
The robotic none
mower is
very noisy.
The robot none
operates
during rain.
If in doubt, consult the customer service hotline.
Strictly follow the instructions of this manual. Faulty mainte-
nance or installation are not covered by the warranty
possible reason
1. Damaged cutting
blades.
2. Cutting blade flooded
by residues (tapes,
ropes, plastic frag-
ments, etc).
3. Damaged cutting
motor or driving motor.
4. Other damages on
the parts of the mower.
The sensor measures
the resistance of the
surface, which can
change due to dirt.
45 (EN)
action
1. Replace blades; the 3 blades need
to be changed at the same time.
The robotic mower's cutting effi-
ciency depends on sharp blades, so
please keep them in good condition.
2. Stop the robot. Use gloves to avoid
any risk of injuries and remove any
residues from the blades.
3. Get the motor repaired or replaced
by the service station.
Clean the rain sensor with a cloth
soaked in a detergent solution.