Mowox RM 750 BTU-SN Manual De Instrucciones página 439

the operation LED flash red and green alternatingly.
3. Enter a new PIN, e.g. "1-1-1-1" and press OK. The lock indicator and the power in-
dicator flash green. Two beeps of the robot indicate: The PIN has been changed
successfully.
Every time you change the PIN, please write it down to remember. Without the correct
PIN, your robot is anti-theft protected and all functions are blocked.
6.6 PIN
FORGOTTEN
Keep your purchase receipt and the robot's serial number
ready. These are mandatory to obtain your PIN.
1. Insert an FAT32 -formatted USB flash device into the USB port shown as below.
Please write down your new PIN:
_ _
29
_ _
(EN)