Phone Buttons; Programmable Buttons - Crosscall CORE-X5 Manual De Instrucciones

Phone buttons

On/off button and screen lock/unlock
This button is mainly used to:
• switch on/off/restart your phone with a long press
• lock/unlock your phone�
• Press the on/off button to manually lock the screen�
• Press the on/off button to turn the screen back on and swipe in any direction on the screen
to unlock it�
Your screen will automatically lock and switch to standby mode after a certain period of
inactivity, to reduce energy consumption and prevent unintentional actions�
To set the time for automatic standby, go to:
Settings > Display > Advanced > Screen timeout and select the desired duration�

Programmable buttons

2
Your CORE-X5 has four programmable buttons (no� 1, no� 2, no� 3 and no� 4) which
can be used in two different ways:
1
• either with a LONG press
3
• or with three SHORT presses in quick succession�
4
This feature allows you to configure two functions of your choice for each button, so 8 in total.
The buttons have a default setting but you can tailor them to your needs�
To do this:
• Go to Settings > Buttons > and select the action for the button you want to configure
(triple tap or long press)�
• For each action, you can:
– Call a specific phone number
– Launch an app on your phone (X-TALK, X-SAFE, Camera, torch, etc�)
– Enable/Disable a mode (glove mode, "Do not disturb" mode)
68
+/- volume buttons
This button, made up of a + key and a - key, lets you set the volume of your calls
+
and notifications by quickly and easily switching between 3 modes:
-
• Ring mode
• Vibrate mode
• Silent mode
It also allows you to easily adjust the volume:
• of calls
• of ringtones/notifications
• of multimedia content
• of alarms
LED notification light
Your CORE-X5 has an LED light for notifications. This can light up when:
• your phone's battery is low (<20%)
• your phone is charging
• photo/video content is being captured/recorded
• Bluetooth pairing is in progress
• you have received a notification for one of your apps.
To configure the notification LED for the functions described above, go to:
Settings > Apps and notifications > LED notifications.
This menu lets you:
• Enable/Disable the events for which you want to be notified.
• Add/Remove the apps for which you want to know when a notification is received. For each
app, you have a choice of 9 colours and a number of flashes between 1 and 3
Several apps are configured by default, but you have the option of adding or removing them as
needed:
• To add an app, click on Add an app and select the desired app from your phone's menu�
• To delete an app, click on the app in question, then on Delete.
You can also choose to only use LED notifications, without your screen lighting up when the
notification is received. To do this, go to Settings > Apps & Notifications > Notifications and
disable the option Turn on screen for notifications�
69