Crosscall CORE-X5 Manual De Instrucciones página 44

CROSSCALL APPS
X-SENSORS
X-SENSORS is an app that provides you with information about the sensors built into your
CROSSCALL mobile phone�
When you open the app for the fi rst time and before using it, please read and agree to the terms
and conditions of use by clicking "Agree".
Magnetometer
This tool acts as a compass, measuring the orientation of the phone in relation to magnetic
north� Calibrate your compass by following the on-screen instructions�
Accelerometer
The accelerometer measures and observes the phone's acceleration in space along 3 axes� It
uses mathematical integration to measure the device's speed of movement while tracking its
position�
GPS
This provides the position of the device and the accuracy of the GPS signal. You can fi nd out
the number of satellites in range as well as your altitude�
Proximity sensor
This feature is used to turn off the screen during phone calls when the phone is placed near the
ear�
Light sensor
The light sensor measures the intensity of light projected on the phone screen� It helps you to
optimise your screen brightness based on the ambient light to save your battery or to optimise
readability�
Bluetooth (5.0) and networks (2G, 3G, and 4G)
These provide information on the presence and strength of communication networks�
Battery status
This function provides an instant visual indication of the battery charging status�
86
X-SAFE
X-SAFE is a CROSSCALL app that allows you to quickly and easily raise the alarm in the event
of an emergency�
Step 1: Setting up X-SAFE
1. Open the X-SAFE app� It is enabled on your phone by default�
2. Enter the relevant information: your name and address
3. Then enter the emergency number(s) you would like to contact when you are in need:
a. Click on Make an emergency call
b. Click on the 3 little dots at the top right of your screen�
c. Click on Select a contact if the number is already saved in your contacts, or on Enter a
number if you want to add a number that is not already saved in your phone�
If you decide to include several numbers in this app, in an emergency the phone will call
the numbers in the order in which you added them� To change this order, you will need
to delete the numbers (by clicking on the green arrow) and save them again in the new
desired order�
4. You can then choose between two different options to notify your loved ones in the event
of an emergency� You can also combine and activate these two options simultaneously
a. If you want to send an emergency message: enable Send an emergency message and
click on it to enter the content of the message you want to send�
b. If you want to make an emergency call: Enable Make an emergency call
5. You can also confi gure some of the app features by clicking on Settings:
a. Enable/Disable LED fl ashing
b. Enable/Disable the audible alarm
c. Enable/Disable the loudspeaker
87