Pit Boss PRO Serie Montaje Y Operación página 20

USING THE PROGRAMMABLE MEAT PROBES
•
A meat probe measures the internal temperature of the meat on the smoker, similar to your indoor oven. Plug the Meat
Probe adapter into the meat probe connection port and ensure it is inserted all the way into the plug. You will feel and hear
it snap in place. Insert the stainless-steel meat probe into the thickest portion of the meat. The internal temperature of the
meat is shown on the display screen.
IMPORTANT: When placing the meat probe into your meat, ensure the meat probe and wires avoid direct contact
with flame or excessive heat. This can result in damage to your meat probe. Run the excess wire out the front door
of the smoker, close the door, and ensure there is enough slack on the outside. When not in use, disconnect from
the meat probe connection port, and keep it in a safe and clean location.
SETTING/PROGRAMMING A MEAT PROBE SET TEMPERATURE
To program the desired Set temperature of the a Meat Probe, follow the steps below:
1. Plug-in the adapter end of a meat probe into a connection port on the Controller.
2. Move the Controller Knob over the Meat Probes and press the Controller Knob up or down to access the
Probes sub-screen. You can also rotate the Controller Knob and press to select at this state or continue.
3. Choose a desired cooking temperature by selecting a protein presets, or rotate the Controller Knob
to directly select the desired Set temperature. The temperature readout will blink blue while being
modified.
4. Once the desired Set temperature of your selected Meat Probe is reached, press the Controller Knob to
confirm.
IMPORTANT: P1 is a programmable meat probe with Controller control. Not only will it cook
the meat to your desired temperature, but once P1 reaches the Set temperature, a beep will
sound and a bell icon will appear. The smoker will reduce temperature to low (65°C / 150°F)
automatically to keep food warm until ready to serve.
P2 is programmable meat probe as well. Once P2 reaches the Set temperature, a beep will sound
and a bell icon will appear.
CONNECTING TO THE PIT BOSS® GRILLS APP
Follow these instructions on how to connect your smoker to the Pit Boss® Grills app with your Android™ or iOS® device. The app
will allow you to control and monitor your smoker and meat probe temperatures from your mobile device. Enjoy the benefits that
Pit Boss® Grills mobile connectivity has to offer!
1. Download the Pit Boss® Grills app. Open the app and allow Bluetooth® to be enabled for setup. New users will need to
create an account and follow the prompts to login.
2. If you are within Bluetooth® range (9 m / 30 ft), the Pit Boss® Grills app will automatically detect your smoker. Select
your smoker model. If you do not see your smoker on the screen, ensure your unit is connected to a power source and is
turned on.
3. Name your smoker model (ie. My Smoker) in the app and select "Connect" at the bottom of the screen. This will save your
smoker model in the devices menu.
4. From the devices menu, click the smoker model to connect. This will show you the controller screen.
5. Click the settings option (gear) in the top-right corner, enter your Wi-Fi credentials, then click the check mark at the
bottom of the screen to connect. Now both Bluetooth® and Wi-Fi (cloud) icons will show on the devices menu, showing
that the smoker is connected.
20