Emerson AVENTICS SPRA Serie Instrucciones De Servicio página 33

Possible cause Remedy (To be carried out by)
Service life of the product is ex- See performance diagram in the online catalog (qualified
ceeded person).
Linear unit cannot be set in mo- Replace product (qualified person).
tion by any of the above listed
measures.
Stroke movement is malfunctioning
Possible cause Remedy (To be carried out by)
Obstacle in the stroke area of Remove the obstacle from the stroke area (instructed per-
the linear unit son).
Impermissible load Remove all loads that act on the elements (instructed per-
son).
Defective screw nut Replace product (qualified person).
Significantly reduced speed
Possible cause Remedy (To be carried out by)
Obstacle in the stroke area of Remove the obstacle from the stroke area (instructed per-
the linear unit son).
Impermissible load Remove all loads that act on the elements (instructed per-
son).
Defective motor, gearbox or Replace product (qualified person).
screw nut
Significant increase in noise during operation
Possible cause Remedy (To be carried out by)
Obstacle in the stroke area of Remove the obstacle from the stroke area (instructed per-
the linear unit son).
Impermissible load Remove all loads that act on the elements (instructed per-
son).
Defective motor, gearbox or Replace product (qualified person).
screw nut
13 Technical data
This section contains an excerpt of the most important technical data. Further
technical data can be found on the product page in the Emerson store.
General
Specifications
Size 32 mm
Temperature range 0 ... +50 °C
Relative humidity (opera-
tion)
Relative humidity (stor-
age)
Assembly
Specifications
Mounting orientation Any
14 Accessories
Information on accessories can be found on the product page in the Emerson
store.
AVENTICS™ SPRA | R412028475-BAL-001-AE | English
40 mm 63 mm 100 mm
0 ... +50 °C 0 ... +50 °C −10 ... +50 °C
Max. 95 % (non-condensing)
Max. 90 % (non-condensing)
33