Descargar Imprimir esta página

Hoshizaki DBF-AS65WE-EU-HC Manual De Instrucciones página 34

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 133
4) Drain the water tank. See "II. 9. [b] DRAINING WATER TANK".
5) Check if the electrode is clean.
If the electrode has turned brown or black or is not clean, contact your dealer/
supplier.
6) Fill the water tank. See "II. 2. FILLING WATER TANK".
7) Plug in the unit. The refrigeration unit and agitator motor start.
It takes about 8 to 13 hours from startup to completion of ice storage in the water
tank. Dispensed beer may not be cold enough until ice production completes.
2. GAS HOSE AND BEER HOSE (MONTHLY)
Check the gas and beer hoses for damage, deformation, and water leak marks (stains). If any problem is found, contact your
dealer/supplier.
3. ATTACHMENT PLUG AND POWER CORD (ANNUALLY / BIANNUALLY)
Check periodically that the attachment plug blades and their vicinity are free of dust and that the attachment plug is securely
plugged into the receptacle. Dusty blades or loose connection may cause electric shock or fire.
Do not damage the power cord. It should not be additionally processed, jerked, bundled, weighed down or caught in. It could
cause electric shock or fire.
The unit must have a separate power supply. Branching off the power cord, using an extension cord, or sharing a single power
supply with other appliances may result in electric shock, heat generation or fire.
Check that:
* The attachment plug blades and their vicinity and the receptacle are free of dust. Clean them if necessary.
* The attachment plug and power cord are not damaged, weighed down or caught in.
* The attachment plug is plugged into a separate receptacle.
V. OTHER INFORMATION
1. PREPARING THE DISPENSER FOR LONG STORAGE
When shutting down the dispenser for more than a week, unplug the unit.
1) Drain the water tank according to "II. 9. [b] DRAINING WATER TANK".
2) Carry out the following maintenance procedures to clean and drain the beer circuit and to keep the unit clean:
III. 5. CLEANING BEER CIRCUIT WITH SPONGE (WEEKLY)
6. DISASSEMBLY AND CLEANING OF BEER TAP (WEEKLY)
7. KEG COUPLER (WEEKLY)
8. EXTERIOR (WEEKLY)
9. AIR FILTER (BIWEEKLY)
NOTICE
IMPORTANT
WARNING
WARNING
Electrode
27
ENGLISH

Publicidad

loading