SATA air vision 5000 Instrucciones De Servicio página 2

TYPE C CONTINUOUS FLOW SUPPLIED-AIR RESPIRATOR
Protective respirator equipment family PART. No. 1012301
THIS RESPIRATOR IS APPROVED ONLY IN THE FOLLOWING CONFIGURATIONS:
Facepiece /
Alternate
Hood or
Belt
Helmet
TC#
X X X
1. PROTECTION
SA=Supplied Air / CF = Continuous flow
2. CAUTION AND LIMITATIONS
A - Not for use in atmospheres containing less than 19.5 percent oxygen.
B - Not for use in atmospheres immediately dangerous to life or health.
C - Do not exceed maximum use concentrations established by regulatory standards.
D - Air-line respirators can be used only when the respirators are supplied with respirable air meeting the requirements of CGA G-7. Grade D
or high quality.
E - Use only the pressure ranges and hose lengths specified in the User's Instructions.
J - Failure to properly use and maintain this product could result in injury or death.
M - All approved respirators shall be selected, fitted, used, and maintained in accordance with MSHA, OSHA, and other applicable regulations.
N - Never substitute, modify, add, or omit parts. Use only exact replacement parts in the configuration as specified by the manufacturer.
O - Refer to User's Instructions, and/or maintenance manuals for information on use and maintenance
of these respirators.
S - Special or critical User's Instructions and/or use limitations apply. Refer to User's Instructions before donning.
SATA GmbH & Co. KG
Domertalstaße 20
D-70806 Kornwestheim
Germany
Tel. 49-07154-811-255
Fax 49-07154-811-193
Alternate
Flow Accessories
Regulator
X X X X X X
10 ft 15 ft 20 ft
X X X X X X X
Alternate Hoses
25 ft 35 ft 50 ft 75 ft
X X X X X X
100 ft Caution
and
Limitations²
A B C D E J
X X X
M N O S