SATA air vision 5000 Instrucciones De Servicio página 26

Operating Instructions for SATA Breathing Protection Equipment
US
[22-5]
.
■ Position control wheel
control cap. Pay attention to align-
ment to control cap
■ Screw on regulator end cap
until hand tight.
11.2. Control operation of air
regulator
Attaching air regulator to belt
unit
■ Insert air regulator adapter plate
2]
into left or right adapter plate
4]
on attached belt unit until retaining
lug engages in release lever
■ From this basic position
air regulator can be tilted forward
[19-2]
or backward
increments at 22.5° and 45°.
Preparing air regulator for oper-
ation
■ Connect compressed air hose to
connection on compressed air supply
[2-4] / [3-6]
■ Route breathing protection hose
from breathing protection hood
[1-2]
through belt loop and insert at
breathing protection hood connection
[2-5] / [3-8]
For air regulator with active carbon
filter and use of air warmer only:
■ Use control wheel
required air temperature.
The air regulator is then ready for
operation.
26
[22-7]
on
[22-8]
.
[22-6]
[18-3]
[19-1]
[19-3]
. Arresting
.
.
[22-7]
to set the
12. Maintenance and Repair
to Air Regulator
The air regulator and air regulator
with active carbon filter are mainte-
nance-free. Replacement parts are
available for repair work (see Chap.
21).
13. Operating the air humid-
ifier
13.1.
[18-
midifier
[18-
The air humidifier is delivered com-
pletely assembled and ready for
.
use.
the
After unpacking check whether:
■ Damaged air humidifier.
■ complete delivery of all listed parts
(see Chap.
■ Check screws
Personalizing the air humidifier
The air humidifier can be person-
alized with a CCS disk [23-1]. A
red CCS disk is installed on the air
humidifier [23-2] at the factory.
■ Remove CCS disk from air humidifier
and replace with CCS disk of another
color.
Activating the SATA filter timer
Information!
The humidifier module must be
replaced six months after its initial
use. The activated SATA filter timer
shows the time remaining [24-2].
■ Press on the activation point
A sound (clicking noise) confirms
Initial use of
6.3
).
[28-3]
for tightness.
air hu-
[24-1]
.