RS Pro RS-33S Manual De Instrucciones página 18

Battery Capacity Tester / EN
5-3 Comparator Tables
Resistance
Voltage
Voltage
Comparison
Value
Voltage comparison value = (High limit voltage value + Low voltage value)/2
5-4 Activating the Comparator
1. Press
display, and the beeper will sound when a WARNING or FAIL result is received.
Press
2. Press COMP key to start comparator function, the "COMP" indication will appear
on the display, and the comparator will start operating once a measurement is
taken.
3. Press the
selected comparator number remains in memory even if the power is turned off.
4. Press COMP key again to stop the comparator function.
5-5 Battery State of Charge Indication
The instrument calculates the battery state of charge (SOC) percentage by
comparing the measured battery voltage and resistance values with the comparator
settings for battery high limit resistance, low limit resistance, high voltage limit, and
low voltage limit values as specified in 5-2.
15
Low limit resistance
Lo
WARNING
Lo
Hi
key to turn the sounder on, the
key again to set the beeper off.
and keys to select the desired comparator number (01 – 99). The
Beeper
Pass
High limit resistance
Middle
WARNING
Beeper
WARNING
Beeper
indication will appear on the
09/15/17 Version No. 00
Hi
FAIL
Beeper
FAIL
Beeper