RS Pro RS-33S Manual De Instrucciones página 8

Battery Capacity Tester / EN
–
V ℃℉ : Measured temperature or comparator voltage low limit setting.
12.
13. IN-CAP
14. OUT-CAP
15. T-CAP
16. 100% : The calculated remaining capacity of the battery.
17. COMP : Shown when the comparator function is on.
NO.
18. : Indicates the number of data memory (1-999) or the comparator table
19. : Flashes once when data is stored to memory.
20. : Shown when the read function is on.
÷
21. : Indicates the elapsed time or the real time (day : hour : minute : seconds).
22. PASS : Indicates that the tested battery is satisfactory for operation.
23. WARNING : Indicates that the tested battery is beginning to deteriorate.
24. FAIL : Indicates that the tested battery has deteriorated.
25. INTV : Shown when setting memory interval time function is on.
26. TIME : Shown when setting real time function is on.
5
mAh : Measured battery charge capacity.
mAh : Measured battery discharge capacity.
mAh : Measured battery total capacity.
(T-CAP) = (IN-CAP)-(OUT-CAP)
number (1-99).
09/15/17 Version No. 00