RS Pro RS-33S Manual De Instrucciones página 22

Battery Capacity Tester / EN
7-2 LOGGING mode
Up to 4GB capacity can be logged and stored in non-volatile memory in the
Tester at a preset interval between 3 - 255 seconds.
The logged data can only accessed via the USB interface to a PC running the
BatCapTester software for subsequent display and storage to hard disk.
Data captured in LOGGING mode can only be cleared from the PC
7-2-1 Continuous LOGGING
1. Press TIME key for 4 seconds, the display will show SET INTV. Use the
keys to select the desired interval time from 3 second to 255 seconds. Press TIME
key to exit.
2. Press M key for 4 seconds to enter continuous logging mode; the INTV symbol
will be shown on the display and the " M " symbol will flash every time a reading is
taken.
3. Press M momentarily to exit.
19
or
09/15/17 Version No. 00