RS Pro RS-33S Manual De Instrucciones página 9

3. SPECIFICATIONS
3-1 General Specifications :
Measuring method : Resistance : AC four – terminal method.
A/D conversion : Dual slope method.
Display : LCD
Sampling rate : 1.3 sets (resistance, voltage, temperature and DC current
Open-circuit terminal voltage : 5V max.
Input over range : "OL" display.
Low battery detection : "
Test current fault detection : "- - - -" display.
Auto power off : If no key operated for 10 minutes.
Averaging function : OFF, 4, 8 or 16 times.
Beeper function : for warning and fail results (can be turned on or off).
Comparator settings : Resistance / Voltage High / Low limits.
Number of comparator settings : 99 sets.
Comparator output : LCD display of PASS, WARNING, or FAIL results and beeper for
Resistance
Voltage
Manual and Auto Data memory : 999 sets (can be read by meter and downloaded by
Auto Datalogging : micro SD CARD 4GB ( maximum 99 blocks)
Operating environment : 0 to +40°C 80%RH (non condensing)
Storage environment : -10 to +50°C 80%RH (non condensing)
09/15/17 Version No. 00
Temperature : NTC thermistor.
DC current : Hall effect sensor.
measurements)/second.
" is displayed.
warning and fail results.
Lo
Hi
Lo
WARNING
PASS
PC).
Battery Capacity Tester / EN
Middle
WARNING
WARNING
Hi
FAIL
FAIL
6