RS Pro RS-33S Manual De Instrucciones página 6

Battery Capacity Tester / EN
3. ⊳
key :
to store one set of readings to memory.
to move the cursor to the left.
press for 2 seconds to go into auto-memory STORE mode, press this key again to
exit.
press for 4 seconds to go into continuouse data logging mode, press this key again
to exit.
4. Zero key :
to turn the zero adjustment function on or off.
to increase the displayed value.
5. key :
to go into manual recorded data reading mode, press this key again to exit.
to move cursor to the right.
6. TIME key :
to change the day-hour, minute:seconds.
press for 2 seconds to go into real-time setting mode, press this key again to exit.
press for 6 seconds to set the time interval for auto-memory STORE and continuous
data logging mode. Press this key again to exit.
7. COMP key :
to turn the comparator function on and off.
press for 2 seconds to go into comparator setting mode, press this key again to exit.
8. HOLD key :
to turn the data hold function on or off.
press for 2 seconds to turn the auto-hold function on, press this key again to exit.
9. Rotary switch : Power on/off and resistance range selector switch.
10. AC adaptor input jack : Connects to the black plug of the ac mains adaptor.
11. DCA CLAMP ADAPTOR input jack : Connects to the yellow plug of the DCA
current clamp.
12. TEMP. SENSOR input jack : Connects to the blue plug of the clip type test lead.
13. SENSE – input terminal : Connects to the blue banana plug of the test lead.
14. SENSE + input terminal : Connects to the yellow banana plug of the test lead.
15. SOURCE – input terminal : Connects to the black banana plug of the test lead.
16. SOURCE + input terminal : Connects to the red banana plug of the test lead.
17. USB cable interface : PC interface connector.
3 09/15/17 Version No. 00