RS Pro RS-33S Manual De Instrucciones página 20

Battery Capacity Tester / EN
7. DATA CAPTURE
7-1 Manual and Auto STORE mode
Up to 999 sets of measured values can be manually or automatically STORED in the
Tester for subsequent recall and display on the Tester.
STORED values can also be uploaded to a PC via the USB interface and
BatCapTester software.
7-1-1 To manually STORE data to the Tester memory
Press the M momentarily to manually store readings one by one to the Tester.
"NO. XXX M " will appear on the display for one second showing the memory
location.
7-1-2 To automatically STORE data to the Tester memory
1. Press TIME key for 4 seconds, the display will show SET INTV. Use the
keys to select the desired interval time from 3 second to 255 seconds. Press TIME
key to exit.
2. Press M key for 2 seconds to start the auto STORE mode, the " AM " symbol is
shown on the display. When a reading is stored the "NO. XXX M " will be shown on
the display for one second to show the memory location.
3. Press M key to exit.
17
NO.
NO.
or
09/15/17 Version No. 00