Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Capacity Tester / EN
1. FEATURES
The Battery Tester is designed for measuring the internal resistance, open-circuit
voltage, and terminal temperature of rechargeable batteries (secondary cells),
including lead–acid, Nickel-Cadmium, Lithium-ion and Nickel-metal hydride batteries.
An AC four-terminal method is used to measure the internal resistance eliminating
lead and contact resistances to ensure accurate results.
4-wire probe type lead set and 4 wire crocodile clip lead sets are supplied as standard
ensuring accurate measurement.
Simultaneous display of the internal resistance and voltage of the battery under test
Comparator function compares the measured battery values with user preset high and
low limit values and indicates the condition and state of charge of the battery.
Clamp adaptor for DC current measurements.
Manual and auto data memory and read stores up to 999 data sets.
Auto datalogging micro SD CARD 4GB up to 99 blocks.
USB PC interface
1
09/15/17 Version No. 00
Publicidad
