RS Pro RS-33S Manual De Instrucciones página 21

7-1-3 To recall a STORED reading
1. Press R key to review the manual or automatically stored readings. The display
will show "NO. XXX R ".
2. Press
3. Press R key again to exit viewing memorised readings.
4. Stored values can also be uploaded via the USB interface to a PC running the
BatCapTester software.
7-1-4 To reset and clear data from the Tester
When the memory is full, the memory number "999" will be shown on the display
and the STORE function will be stopped.
1. Turn the meter off by rotating the resistance range switch to off.
2. Press and hold M key, then rotate the resistance range switch to turn on the instrument,
the display shows "CLr, YES, m, no" symbols.
3. Press ⊳ key to select "YES" to clear the memory.
09/15/17 Version No. 00
and keys to scroll through the memorised readings.
NO.
Battery Capacity Tester / EN
18