– During transport and storage, the ambient tem-
perature must be between -25°C and 55°C. How-
ever, the electrical equipment may be exposed to
a temperature of up to 70°C, provided the expo-
sure time does not exceed 24 hours.
RECOMMENDATIONS FOR USE
Important
The rate of accidents deriving from the use of
appliances depends on many factors which
cannot always be foreseen and controlled.
Some accidents may be caused by unpredict-
able environmental factors, while others are
due above all to the behaviour of users. As
well as receiving authorisation and appropri-
ate instruction, if necessary, the first time
they use the appliance, users must carry out
a few simulated practice operations in order
to get to know the controls and the main func-
tions. Use only as intended by the construc-
DESCRIPTION OF CONTROLS
The appliance is fitted with the controls for use of its
main functions.
A)Burner control knob: for lighting, turning off and
regulating the relative burner and pilot light
Off marker
Full tempera-
ture marker
A
USE AND OPERATION
Pilot light
marker
Minimum temperature marker
Temperature dial
If it is not possible to comply with one or more of the
conditions listed, essential for correct operation of
the electrical equipment, agreement must be
reached in the contract concerning the additional
features required to create the most suitable condi-
tions (e.g. special electrical components, air-condi-
tioning equipment, etc.).
tor and never tamper with any device to
obtain performance levels outside the rated
specifications. Before use, check that the
safety devices are properly installed and in
good working order. As well as taking
care to meet these requirements, users
must also implement all safety regula-
tions and read the description of the con-
trols
and
the
carefully.
B)Piezoelectric ignition knob: for lighting the pilot
light
C)Water tap: for regulating the flow of water
Piezoelectric ignition
A
C
B
B
- 7 -
start-up
procedure
marker
IDM-39605900200.tif
4
IT
GB
DE
FR
ES
English