Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION OF THE APPLIANCE
All installation stages must be considered right from
production of the general layout. Before starting
these stages, as well as deciding the place of instal-
lation, if necessary, the person authorised to carry
out these operations must organise a "safety plan"
to protect the people directly involved, and he must
also ensure strict compliance with all legal require-
ments, especially those relating to mobile work-
sites.
The place of installation must have all the connec-
tions needed to supply the appliance and dispose of
the production residues, must be suitably lit and
must meet all legal health and hygiene require-
ments to prevent the contamination of the foods.
If necessary, fix the exact position of each individual
appliance or subassembly by mark coordinates to
locate them correctly.
Appliances must be at some distance from the
ROOM VENTILATION
The room where the appliance is installed
must have air inlets to ensure that the appliance
can operate correctly and provide the necessary air
exchange in the room itself.
The air inlets must be of appropriate size and must
be protected by gratings and placed so that they
IT
cannot be obstructed.
GB
DE
FR
INSTALLATION OF DISMANTLED PARTS
ES
The appliance is delivered with some components
dismantled and they have to be fitted during instal-
lation. Specifically, the floor-mounted feet must be
fitted (A).
Adjust the floor-mounted feet (A) to level the appli-
ance.
English
LEVELLING
wall (at least 5 cm if the wall is not designed to be
resistant to a temperature of at least 150°C)
Provide a drain in the floor for the well to empty into.
- 14 -
IDM-3960200200.tif
IDM-39605900600.tif
IDM-39605901600.tif
A
IDM-3960200220.tif
Publicidad
