Publicidad
Idiomas disponibles
Idiomas disponibles
Lighting
1 - Turn on the gas supply tap.
2 - TPress the knob (A) and turn it anti-clockwise
(pos. 1) while at the same time pressing the pi-
ezoelectric ignition knob (B) repeatedly to light
the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Check that the pilot light is lit through the in-
spection slit (C).
5 - Turn the knob (A) anti-clockwise (pos. 2) to the
temperature required.
Turning off
1 - Turn the knob (A) clockwise (pos. 3) to turn off
the burner.
The pilot light will remain on to allow the burner
to be re-lit.
2 - Press the knob (A) and turn it clockwise
(pos. 4) to turn off the pilot light.
3 - Turn off the knob to ensure safety.
IT
IT
GB
GB
Filling
DE
DE
Important
Before proceeding with this operation
check that the well is not raised and resting
FR
FR
firmly on fixed part of appliance.
ES
ES
To carry out this operation, proceed as follows.
1 - Raise the lid (A).
2 - Turn on the tap (B) and fill the well (C) with wa-
ter using the spout (C).
3 - Turn off the tap (B) once the water reaches the
level shown by the marker (D).
4 - Close the lid (A).
English
SWITCHING THE BURNER ON AND OFF
FILLING AND EMPTYING THE WELL
1
1
A
4
C
B
- 8 -
C
A
2
3
B
IDM-39605900300.tif
A
D
IDM-39605900400.tif
Publicidad
