WIKA DMSU22SA Manual De Instrucciones página 36

9. Diagnostic functions
3. Select "Current sim." and confirm with [↵].
4. Select the current value or define via "Input".
Change digit using [▲] [▼] and confirm with [↵]. The cursor
moves to the next digit. Repeat for each digit.
» Simulation is active.
EN
5. Ending the simulation. Press [ESC] to do this.
9.3 Displaying/resetting drag pointer
The drag pointer function displays the limit values reached since the last reset. These limit
values can be displayed and reset.
9.3.1 Drag pointer P
Displays the minimum and maximum pressure that has occurred since the last reset.
Displays
1. Open the operating menu with [↵].
Select "Diagnostic" and confirm with [↵].
2. Select "Drag pointer" and confirm with [↵].
3. Select "P min/max" and confirm with [↵].
4. Select "display" and confirm with [↵].
» Limit values are displayed.
P = P
▼ min
P = P
▲ max
36
/P
min max
WIKA operating instructions, model DMSU22SA