Publicidad
Idiomas disponibles
Idiomas disponibles
15. Specifications
15.4 Electrical connections
Electrical connections
Spring-loaded terminals
Cable gland M20 x 1.5, stain-
EN
less steel in hygienic design
Angular connector DIN 175301-
803A with mating connector
Circular connector M12 x
1 (4-pin) without mating
connector
Grounding screw, inside
Grounding screw, outside
The stated ingress protection only applies when plugged in using mating connectors that
have the appropriate ingress protection.
15.5 Reference conditions per IEC 61298-1
Reference conditions per IEC 61298-1
Temperature
Auxiliary power
Air pressure
Air humidity
Characteristic curve
determination
Curve characteristics
Reference mounting position
50
Wire cross-section:
Wire or stranded wire: 0.2 ... 2.5 mm² (AWG 24 ... 14)
Stranded wire with end splice: 0.2 ... 1.5 mm² (AWG 24 ... 16)
Cable diameter: 6 ... 12 mm [0.24 ... 0.47 in]
Cable diameter: 6 ... 8 mm [0.24 ... 0.31 in]
Wire cross-section: max. 1.5 mm² (AWG 16)
Ingress protection: IP65
Observe manufacturer's specifications
0.13 ... 2.5 mm²
0.13 ... 4 mm²
23 °C ±2 °C [73 °F ±7 °F]
DC 23 ... 25 V
860 ... 1,060 mbar [86 ... 106 kPa, 12.5 ... 15.4 psi]
45 ... 75 % r. h.
Terminal method per IEC 61298-2
Linear
Vertical, diaphragm points downward
WIKA operating instructions, model DMSU22SA
Publicidad
