Pando PHB-861 Manual De Uso E Instalación página 205

Ovens Pando
Sonda De Temperatura
Your oven is equipped with a probe to measure
the temperature of the food. When you insert the
meat probe in the position, the icon
up. At the same time the The display will change to
show the temperature setting of the meat cooker.
1. Insert the short end of the probe into the pro-
be hole in the upper right corner of the cavity.
2. Insert the long end of the probe into the cen-
tre of the food.
3. Select the probe temperature.
4. Press " " to select a function (Only the fo-
llowing functions:
5. Press the " </> " key to set the temperature.
6. Press the " " key to start cooking.
Function Lock & Power On
Your oven is fitted with a safety lock so that it can not
be switched on or any settings changed accidentally.
A long press for 3 seconds activates the lock. A
further long press of 3 seconds unlocks the oven
again.
You can activate and deactivate the lock when the
oven is running or stopped, by long pressing
3 seconds on the symbol.
Steam
1. Steam can be added manually by pressing
the steam button during cooking.
2. With the oven in standby mode, press the
will light
steam button to set the steam mode and
add steam for cooking. The default steam
level is 1 [ L01 ].
NOTE: The steam has three levels, the amount
of steam increases with increasing level. Press
the steam button once and you will have level 1.
Press twice and you will have level 2, and press
three times and you will have level 3. Whichever
).
level is chosen, the light on the right of the display
will show the level (L01/L02/L03).
Press the steam button four times to cancel
the addition of steam and it will switch off.
for
English
25 25
Integral Cooking Integral Cooking