Publicidad
Idiomas disponibles
Idiomas disponibles
Ovens Pando
RISK OF INJURY!
If the hinges are not locked, they can be
snapped shut with great force.
Ensure that the locking levers are always
completely closed.
Dismantling the oven door
1. Open the oven door fully.
2. Open the two locking levers to the left and
right.
3. Hold the door with both hands on the left and
right side and pull it upwards with an angular
movement.
Assembly of the oven door
Reassemble the oven door in the reverse
order of disassembly..
1. When fitting the oven door, ensure that both
hinges are positioned squarely in the installation
holes in the front panel of the cavity.
2. Make sure that the hinges are inserted in the
correct position. You should be able to insert
them easily and without resistance. If you feel
any resistance, check that the hinges are co-
rrectly inserted into the holes.
3. Open the oven door fully. While opening the
oven door, you can recheck whether the hinges
are in the correct position. If they are positioned
incorrectly, do not you will be able to open the
oven door fully. Close both locking levers again.
4. Close the oven door. At the same time, we
strongly recommend that you check once again
whether the door is in the correct position. and if
the ventilation slots are not too bad sealed.
Removing the door cover
The plastic inlay on the door cover may discolour.
For thorough cleaning, you can remove the cover.
Remove the oven door as shown
above.
1. Press the right and left sides of the lid together.
2. Remove the cover.
3. After removing the door cover, the rest of the
oven door can be easily removed so that you
can continue cleaning. Once cleaning of the
oven door is complete, replace the oven door
cover and press it back into place until it au-
dibly clicks into place.
4. Position the oven door and close it.
English
37
37
Integral Cooking
Integral Cooking
Publicidad
