Motorola Solutions IMPRES 2 Guia Del Usuario página 14

MN002407A01-AK
Chapter 2: Operational Safety Guidelines
Kit (Part Number)
NNTN9089
NNTN9090
NNTN9126
NNTN9127
PMNN4812
2.6
Charger, Pocket, and Communications Module
The APX-Series IMPRES 2 Adaptive Charger System is a fully automated battery care system. The charger
is equipped with the following features:
● Adaptive charging to accommodate a wide variety of battery types, including IMPRES 2, IMPRES, and
other authentic Motorola Solutions batteries.
● Pocket that accommodates either a stand-alone battery or a radio with attached battery.
● Red/Amber/Green LED indicating charger pocket status.
● Communications Module:
○ Charger reprogramming
○ IMPRES 2 or IMPRES battery data upload to an IMPRES Battery Fleet Management System.
○ (Optional) Six USB Type A charging ports, each with 0.5A for charging of a USB accessory
● Keypad Menu
○ Charger Setup
○ Battery Analysis
● Information Display on Pocket #1
○ Optional displays on other pockets
● Preparation of a stand-alone IMPRES 2 or IMPRES battery for long-term storage or preparation of a
stand-alone Motorola Solutions Lithium-Ion battery for shipment. DO NOT leave batteries in the charger
after preparation for Long-Term Storage or Lithium-Ion Shipment is complete.
● Energy-Efficiency Features
○ Compliant with the California Energy Commission appliance standards for small battery charging
systems. The charger pockets automatically sleep, then wake to respond to user action or to service
a battery in the pocket.
○ Compliant with the European Standby Current Limits (European Charger Kit). When Power Saver
Mode is enabled, all charger pockets, except Pocket #1, turn off automatically when there is no
activity for a period of time. Pressing any Keypad button turns these pockets back on.
● Higher-rate IMPRES 2 Lithium-Ion battery charging
● Faster charging
● Extended battery life cycle
Operation of a radio while it is in the charger is not recommended.
During the charging process, radio operation may result in minimally reduced radio performance and
extended battery charge time.
14
Description
IMPRES 2 Li-Ion IP68 5650 mAh
IMPRES 2 Li-Ion DIV2 (HAZLOC) IP68 5650 mAh
IMPRES 2 Li-Ion IP68 4400 mAh
IMPRES 2 Li-Ion DIV2 (HAZLOC) IP68 4400 mAh
APX NEXT XN IMPRES 2 Li-Ion DIV 2 (HAZLOC) IP68 3400 mAh