Motorola Solutions IMPRES 2 Guia Del Usuario página 74

MN002407A01-AK
Chapter 18: Mounting Multi-Unit Charger to Wall Bracket
Chapter 18
Mounting Multi-Unit Charger to Wall
Bracket
A wall mount bracket (Part Number: 0705559L01) is available for the Multi-Unit Charger. Contact your local
dealer to order this item.
Prerequisites:
WARNING:
● This wall mount bracket must be installed by a trained and experienced technician. Having the
product installed by a nonspecialized technician is very dangerous, and can cause damage or
injury.
● Do not install the product where the weight cannot be supported. If the strength of the location
where the wall mount is installed is not strong enough, it can fall off and cause an injury.
● Do not install on a structure that is prone to vibration, movement, or chance of impact.
Figure 30: Bracket Mounting Holes and Catches Position
Bracket
Procedure:
1. Position the wall mount bracket in the desired position, and mark the location of the mounting holes on
the wall surface.
CAUTION: Ensure the area behind the mounting surface is always free of electrical wires,
cables, and pipes before cutting, drilling, or installing the mounting screws.
NOTE: Mount bracket to the wall using the appropriate mounting hardware required for the type
of wall material fixture.
2. Drill based on the marked mounting holes on the wall surfaces.
74
Catchers for
Charger
Attach
to wall
Mount to Bracket
Charger